VGuard N series Manual do Utilizador

ChateauXP ChateauRT4 User’s Manual All rights reserved. ©2005 Chateau Technical Corp.

9 9.3.4 Video Configuration...82 9.4 Remote recording and Remote function...

10 Chapter 1: Installation 1.1 Package Contents Chateau package includes:  One VGuard PCI interface card.  One CD containing the VGuard system d

11 to Camera 4 for the main card. Video inputs (BNC) terminal numbers for the expansion board from top to bottom are Camera 5 to Camera 8. The red, w

12 the motherboard with JP2 (1、2) on the VGuard card. Then connect JP2 (3、4) to the reset switch on the computer panel for automatic launch function.

5. Follow the instructions and select the Next button to continue the installation. Note: Installation programs will inform whether your computer n

14 As the image files and directories are not actually removed during the process of removing the Chateau programs, therefore, those directories crea

Chapter 2: System Overview To execute Chateau program, simply double-click on the shortcut icon on the Windows Desktop as illustrated below. (It is r

can be accessed for the modifying of the system. Other users can only be accessed for operation or depending on the predefined access auditing. 2.2 Ma

to accommodate the displays of all images. The image will be at full screen size if double clicked again. Another double click will return to the norm

the user logout from the system, the system will automatically display as a full screen image. The user will then need to press ESC button for re-logi

1 FCC (Federal Communication Commission) Notice This equipment has been tested and found to be in compliance with the criteria for Class B digital d

6.3 Alarm/User Log for more detail. E-Map: Please refer to Chapter 3.11 E-map for more detail. Mute: Shut down all audio outputs from the soun

images. The following buttons in the control panel can change to the different functional control panel as below; Host: Click button to change t

Chapter 3: System Setup Click the button on the Setting Functional Panel, to open the System Setup Menu. This System Setup menu contains of Board

Note: ‧ Setup should be set under “Not Recording” status for the system to be saved and valid. ‧ A Chateau system can install a maximum of 16 camer

23 and spf). Chateau System automatically adjusts the recording speed to the maximum speed of the CPU if the specified speed exceeds the PC maximum s

 Automatically launch Chateau Program: Allow you to setup automatically function to launch Chateau application program upon PC startup.  Automati

- Every Day: User can set to reset the system once every day. - Every Week: User can set to reset the system once every week. - Every Month: Use

sound when any of the above three events occurs.  TV-Out Display Mode: This function only supports VG8C-XP-TV card. It has 3 display modes, Auto Sc

before using this function to login the remote DVR system. Please refer to Chapter 6.2 Setup for Receiving DVR remote warning.  Live Audio: If enab

 My channels auto scan: When one or more sets of “My channels” are set. By activating this function and set the interval, the system will display d

2 INTRODUCTION Chateau Digital Video Surveillance System is an all-in-one system that integrates various functions including monitoring, video record

29  E-Mail From: Please enter the e-mail address from the sender to let the receiver knows who is sending this e-mail. (This e-mail address has to

triggered. To increase the e-mail sending speed, Chateau program will transform the snapshot into JPG format automatically when sending the e-mail.) 

- Playback: Enable user to access Playback, Search, Load Picture, Text and Text Color. - I/O: Enable user to access I/O device control. - PTZ: E

the authorization access for users). 3.5.3 Delete User Select the user to be deleted and click the Delete button to delete user. (Only the System Admi

- There is a function for disk full alarm. If user enables this function and selects a warning sound by pressing … from the alarm sound bank. When

- Name: Name used to setup My channels combination - Content: No function in this section - Split screen: It is used to select the split screen th

3.7.2 Edit My Channels Select the name of the “My Channels” for editing. Click the Edit button to edit the appointed “My Channels”. 3.7.3 Delete My

the host mode, the camera relatively to the host will be stop under My Channels mode. Whether the remote camera is still recording is depends on which

After a sound file is selected, Click Open then it will return to the following screen. Click Preview to ensure the selected file is a right one.

3.9.1 Adding a New Entry To Address Book: To add a new entry to the address book, click New and then the following dialogue box appears.  New Serv

3  Support Webcam function. Users can remote monitoring using IE browser.  Intelligent real-time motion detection and alarm functions. - Adjustab

require to insert the name you applied). Type is “Server”, IP must be 0.0.0.0, Port is set as 40000 like normal ChateauServer setting. After the setup

 Please enter start date/time and end date/time into “From” and “To” fields respectively. In inputting the date/time, you may type them directly on

 When all of the schedules are set, click the OK to add it to the schedule list. 3.10.2 Edit Program Click Edit or double click on the desired progr

- Add Camera: To add a camera onto the map, click button on the left upper corner; the cursor then turns to “＋”, Move the cursor to the desired pos

- Host setting: If the cameras belong to the same host, by clicking the icon you can create a map for this host. Setting is the save as the level

As shown on the left hand side of the above picture, this tree form graph is to select the e-maps for different level when there are 2 or more e-maps

As illustrated above, icon denotes a camera triggering an alarm. Thus, it is easy to locate the alarming camera on the e-map and be taken care spee

46 Chapter 4: Recording After a user finished camera setup, the recording can be activated. When clicking the recording button, system will activate

setup. 4.1.1 Start Recording of Cameras You may open all of the windows and start recording of all cameras by clicking the button. 4.1.2 Stop Re

4.2.3 Unmask Motion Detection Area By pressing the button in the status panel lets you cancel all of the motion detection areas of the designated

4  Clipping of video files  Hiding recording screen  Password protection  Auto-start video recording as soon as computer is turned on  Automat

Every cameras have the same optional and functional settings. Each setting is detailed as follow..  Camera function setup - Enable Camera: The imag

together with the Motion Detection setup to finish setting up of the alarm detection function).  Camera Name Setup: A user can set the camera name fo

1. Monitoring and Recording (Display camera images): Activate recording options and display image options. 2. Monitoring but not Recording (Display

The detection area in the photo on the left is shown in blue color, to mean that alarms are triggered but Enable Alarms of the Alarm Setup option in

Chapter 5: Playback In the following description, you will be able to find the saved video file and load picture function as follow. 5.1 Video Play

5.1.2 File Mode Clicking the File Mode button on the Playback Panel the following screen will be shown. The screen will be divided into left and r

- Host: The top level is the host name. Exclude its own host name, it also include the connected host name. A user will not be able to see the connec

DVR for the file downloaded. Downloaded files will be saved inside the directory. Selection of the recorded file from the remote database, the time se

5.2 Video File Playback By double-clicking on the desired file in the video file area, you can playback the video file as illustrated in the followin

Each playback function button is described as follow: 5.2.1 Play This button functions the same as Play button of traditional video player. When c

5 INTRODUCTION ...2 Special Notice: ...

25%; and click it again to further reduce it by another 25%; and so on down to 50%. 5.2.10 Start Video Clip Click this button during video playback,

5.2.19 Fast playback and slow playback Left is the control panel for playback speed. The middle is playing at the speed of 1x. By clicking to each poi

1. Triggered by image alteration in motion detection area. 2. Triggered by “Video lost”. 3. Triggered by (sensor) signal from the input port (ple

button, the following Schedule window displays.  Adding a new alarm schedule: Click the New button to add a new schedule. There are four repeat mo

Snapshot pictures will be saved under Picture directory on the alarm date. Select this option and you can enter the continuously snapshot number and p

Select this function and click the select button, then the sound selection dialogue will be popped up. Select the needed sound file and click the OK b

The System Administrator can click Delete by clicking the right mouse button to delete an alarm log entry. Click Delete all to delete all of the alarm

I/O device. - RS232-to-RS485 interface (high speed) dome camera control. - VGIO on VGuard card controls input/output device and watchdog. Its operat

- Mikami PTC103A speed dome camera - Sensormatic speed dome camera (RS422 Interface) - Philip CSS speed dome camera (Require Philip’s own RS232-485

7.1.4 Editing I/O Device Click on the device to be edited the Editing I/O device dialog will pop up for editing. 7.1.5 Setting up I/O Device Double

3.7.1 New “My Channels”...33 3.7.2 Edit My Channels...

 Pulse 1: Positive pulse  Pulse 2: Negative pulse  Signal 3:Toggle Signal 3 (toggle) is for switching ON and OFF the external device. If the extern

- Play Alarm Sound: Select this option and click Select, the sound selection dialog will pop up. Select the wanted sound file and click OK. The sound

7.2.2 Iris, Focus, Zoom Control Move the cursor to the desired control button and hold the mouse on left button to perform the desired operation. Wh

After finishing preset point setup, you can have Chateau Programs supplemental function, i.e. “Cruise”. Cruise allows you to have the cameras to fast

Chapter 8: ChateauServer To monitor a remote recording display or to transmit an alarm video through LAN, Internet or Intranet, a ChateauServer progr

74 8.2 ChateauServer Window 8.2.1 Login / Logout Click the File can login user. Before you leave the computer, we suggest you logout ChateauServer

ChateauServer program after the computer powered-up, so as to match with the Automatically connect to server function of the Chateau application progr

other IP address except listed here are allow to connect to the server. 2. Open the IP address listed below: IP addresses listed here are the IP addr

8.2.9 Group This group functions can categorize the recording hosts connected to ChateauServer. User can create new group and move the hosts to the n

8.3 The Connection Contents The upper parts of the ChateauServer window display all the connection contents for all hosts. The lower part is the con

4.3.4 PTZ control select...52 4.3.5 Alarm setup...

The IP address can only be able to make connection to your server if you add this in the open IP address or delete this IP address from the shield IP

Chapter 9: Remote Access Chateau System can transmission video files and control, activate remote control through TCP/IP supported LAN or Internet.

Double click by the right mouse on the server name to exit the remote monitoring Note: 1. All of the Chateau systems connected to a same ChateauServ

User’s authorization is depending on the authorization setting for logging in the host, not the remote site authorization. Please refer to Chapter 3.5

User will need to select the desired camera for recording or not recording. After clicking Ok button, the system will then transmit the images to the

84 the server through router under LAN 192.168.1.11:40000 < -------- > 211.172.12.34:40000 This means, the Server IP setting for VGN Embedded D

192.168.2.20:50000 < -------- > 211.175.21.43:60001 192.168.2.21:50000 < -------- > 211.175.21.43:60002 192.168.2.22:50000 < -------- &

5. Select “Trusted Sites” 6. Untick “Require Server Verification (http://) for all sites in this zone” 7. Web address for the Chateau host to be m

10. Select Enable or prompt for “Initialize and Script ActiveX Control not mark as safe” as below:  IE Remote DVR 1. If connect directly to the w

If under the web server function for ChateauServer, type in http://192.168.16.107:8080 (Connection to ChateauServer use the 8080 communication port,

6.3 Alarm/User Log...64 Chapter 7: I/O Device...

in the above images means that channel three is set as off. means that these users are not authorize to remote this camera. 3. Select the camera f

The above setting is used when DVR is real IP address (ISP will provide fixed/real IP address or the IP address received from ADSL connection), or DV

2. IP address (Inside) for the router is 192.168.1.1, and the IP address for all internal network is 192.168.1.2~192.168.1.254 (Please setup the IP

modified in this example. Please setup the IP address using your own network IP address) Note: WAN setting port numbers have to be different. 5. Rout

Chapter 10: VG Player Program A VG Player program is included in the Chateau software. You can use this program to playback all image files that Cha

Video File Playback for detail description. 10.1 VG Player 10.1.1 Search VG Player also support search for VG files by parameter. Under File command,

Setup is similar to Chateau’s motion detection setup. You will require selecting active motion search after setup to active this function. During pla

Note: When converting of VG files to AVI files, the data will be taken lots of spaces, if the original VG files are very large, it will consume a grea